Install Lollipop ROM for Samsung Galaxy Core I8262

IAndroid 5.0 Lollipop

Pre-requisites

This ROM is only made for Samsung Galaxy Core I8262 model and meant nothing for any other device. Don’t try this ROM over any other device. It could damage it to very high extent.
Your phone must be on Custom Recovery i.e CWM recovery. This ROM can only be flashed with CWM recovery. CWM recovery installation guide is also included this post, so use it to install CWM on your phone.
Backup your current ROM for future safety. If anything goes wrong after installing this ROM then you can switch back to old ROM using this backup. To make backup, go to recovery mode (look in installation guide), and then look for ‘backup and restore” then “backup“.
The process will erase your phone’s memory completely. So if you have saved any data on your phone’s internal memory then save it to some safe place before moving any other step.
Enable USB debugging, go to settings -> developers options ->then check the USB debugging box.
Make sure that your phone is charged to good extent. Is should be alive for whole process. It is recommended that you charge your phone up to 50%.
Downloads

• Download Rom

 Install CWM recovery on Samsung Galaxy Core I8262 Here

How to install Lollipop ROM for Samsung Galaxy Core I8262

1. Firstly download the two zip files listed in download section and put them to SD card of your device.
2. Now turn off the device and wait for 5-7 seconds.
3. Now boot into the recovery mode press and hold Volume Up + Home + Power buttons at the same time until Samsung Logo appears on the screen. The release the buttons and you’ll at recovery mode very soon.
4. Now from recovery mode perform the followings:
   1. Select and perform “Wipe data/Factory reset”.
   2. Select and perform “Wipe cache partition”.
   3. Go to “Mounts and Storage” and mount the followings: mount system, mount cache and mount data.
   4. Go to “Mounts and Storage” and select “format system” and perform it.
   5. Go to advance and then select and perform “Wipe Dalvik Cache”.
5. Now it is time to install the ROM. Select “install from sd card” and then “choose zip from sd card” then find and locate the downloaded “532897011.zip” file. Select “Yes” on next screen to confirm the process. It will take several minutes to complete, till then wait.
6. When it completes, again select “install from sd card” and then “choose zip from sd card” then find and locate the downloaded “fix1 for b2.zip” file and confirm “Yes” on next screen.
7. When you done with installing both files, from recovery options select and perform “Wipe data/Factory reset”.
8. Now select “reboot system now”.

Remember: First boot may takes up to 5 minutes to get you to home screen, so don’t get pani

Features Of LolliCop Rom For Galaxy Core Duos  -


→ Pre-Rooted SuperSU-v3.1.3 (46)
→ Deodexed
→ Debloated
→ Signal Tweaks
→ 3G Tweaks
→ Battery Tweaks
→ GUI Tweaks
→ Smooth Scrolling
→ ADB Notification Icon Disabled
→ Better Call Voice Quality
→ Dalvik Tweaks
→ Media Tweaks
→ Camera Tweaks
→ Wireless Speed Increase Tweak
→ Better Internet Speed Tweak
→ Better Video Streaming
→ Pure Performance X 
→ init.d Support
→ TeslaLED Included for Flashlight


MOD THEME:
→ Semi Trident Transparent Status Bar.
→ White LolliPop Icons in Status Bar
→ No AM/PM in Status Bar and Pulldown.
→ Remove Factory Reset in Settings
→ K-Pop Style Statusbar Pulldown 
→ Non-Transparent ROM
→ White MMS
→ White Settings
→ S.Planner added
→ Zawgyi FlipFonts added
→ Redesign Phone, Contacts, Calculator...
→ Multi Window
→ KITKAT Launcher
→ KITKAT Camera
→ KITKAT Maps and Street
→ KITKAT Wallpaper
→ KITKAT Calendar
→ KITKAT Email
→ LolliPop Bootanimation
→ KITKAT Default Icons

CHANGE LOGS:

→ Fixed System UI Force closed 
→ New Gallery 
→ New System UI with 5 tabs
→ New Framework
→ Fast , Smooth 
→ Touchwiz as default launcher 

ScreenShots -